Your Specialist in Insulation & Sealing and Protection Solution

Focus on heat shrink tube, cold shrink tube, wire and cable identification labels, Volsun Electronics is your ideal choice for industry insulation, sealing and protection.

Press Release

Technology Knowledge

Events

FAQ

  • Opens in new window
  • Opens in new window
  • Opens in new window

The cold shrink tube with inside mastic is also one of our typical cold shrink products.
Cold shrink tube with mastic is an open-ended, water proofing mastic, cold shrink silicon rubber sleeve, which is factory pre-expanded and assembled onto a removable core.
The core is removed when the tube is positioned for installation over an online connection or termination lug. The inside mastic provides excellent moisture-tight seals for termination and joints.



This kind of cold shrink is mostly used as a waterproof seal for cable television connector and a waterproof seal for connecting wires and cables. Widely used for waterproof seal in coaxial cables
on telecommunication base stations, N-type connector, 1/2 jumper, Din head and 1/2 jumper connector. Also, it is ideal insulation seal product for other types of connection.

The cold shrink tube with mastic inside at both ends is the mostly used by customers. But recently, there are several customers inquiring us about a new type, it is cold shrink tube with inside mastic
at one end, we can certainly produce this type without any problem, and it has same properties like normal cold shrink tube. The following photo of cold shrink tube with mastic on one side for reference.



When it comes to the installation, I’d like to say that the installation steps for cold shrink tube are similar. First, clean the ready connector, put cold shrink tube on it, then fix the connector and then remove
the plastic supporting core slowly, so installation finished.

For our silicone cold shrink tube, the available color is black, grey and white, we can also produce other colors if need.
As a professional manufacturer of cold shrink tube, Volsun not only produce the regular cold shrink tube, but also develop new design cold shrink products based on customer’s actual needs, we will also
follow up the market demand to research and develop more waterproof sealing insulation solutions in future.

So please feel free to contact us via volsun2006@szvolsun.com if you have any needs of cold
shrink products in telecom base station.

Website: www.szvolsun.com     www.coldshrinktubing.com


  • Opens in new window
  • Opens in new window
  • Opens in new window
Return Top Contact Return Boot